Printable PDF · 20 pages
The Japanese Hand Tool Fix-It Guide
Every common beginner problem with Japanese pull saws, chisels and kanna, explained the same way: what you see, why it happens, how to fix it, and how to stop it happening again.
What's inside
- 20 problem cards with step-by-step fixes and prevention tips
- Clear diagrams: ryoba teeth, starting a cut, the hollow back, hoop setting, kanna parts, blade adjustment, sole contact points
- A six-step sharpening routine and typical bevel angles
- A glossary of Japanese tool terms with kanji and readings
The 20 problems
- S1 The cut wanders off the line
- S2 The saw binds or sticks in the cut
- S3 Teeth chipped or broke off
- S4 The blade is kinked or bent
- S5 Which side of the ryoba do I use?
- S6 Ragged edges and splinters where the saw exits
- S7 The cut is hard to start
- S8 The flush-cut saw scratches the surface
- C1 The back is hollow. Did I get a defective chisel?
- C2 The edge chips or crumbles
- C3 The steel hoop on the handle is loose or falls off
- C4 What hammer should I use?
- C5 Rust spots on the blade
- K1 My new plane doesn't cut at all
- K2 The blade is too tight, or too loose, in the body
- K3 How do I adjust the blade? It feels like guesswork
- K4 Chatter and tearout
- K5 The sole isn't true
- K6 The mouth clogs with shavings
- K7 The plane is hard to push. Wait, it's a pull plane
Instant PDF download. Payment is handled securely by Payhip. If a fix doesn't make sense, email us and we'll explain it.